Heavy Hitter MX Direct Mount Riser for 1-1/8" Fat Bars
Run real 1-1/8" motocross bars on your E-Moto. No more bending 31.8mm MTB bars with no replacement on hand; you can grab moto bars at any dealer, in far more bends to find your perfect ergonomics. The Heavy Hitter MX Riser puts the bars directly over the stem like a motorcycle, for a more natural steering feel and better leverage over the front end, especially at low speed.
Important: you must trim your steering tube to the correct length to use this stem, and it only works with 1-1/8" dirt bike handlebars.
ā
BIKE FITMENT
-
E-Ride Pro S / SS 2.0 / SS 3.0 / SR / 4.0 (does not fit the OEM display; get a new display mount or cut off half the display mount)
- Talaria Sting MX3 / MX4 / MX5
- Talaria XXX / XXX Pro
- Surron Light Bee
- Segway X260
- Rerode R1 / R1 Plus
- Zero XB
- Ventus One / One Plus
- Arctic Leopard XE
- Vetra Blazer
- Tork Pro Sport
- Rawrr Mantis X
- Apollo RFN
- Beta Explorer
Also fits these forks: FOX 40 (2009+), Marzocchi 888 and 380 (2013+), RockShox BoXXer (all), Manitou Dorado (all), and most dual crown downhill forks (RST Killah, DNM, FastAce and more).
These bikes come with a wide range of equipment, and stem locks may affect installation. Verify fitment with your bike's setup before ordering.
Features
- Adds 1.75" of rise and moves the bars over the stem for better ergonomics
- Wide clamping area for a stiffer bar
- 7075-T6 aerospace-grade aluminum, anodized
- Bolts directly to stock and most aftermarket forks
- Fits 1-1/8" (28.575mm) motocross fat bars
- Torque spec: 132 in-lb (11 ft-lb) on the top clamp; tighten all 4 bolts evenly
Black
What's Included: MX direct mount riser in black
Gold
What's Included: MX direct mount riser in gold
Purple
What's Included: MX direct mount riser in purple
Silver
What's Included: MX direct mount riser in silver
Red
What's Included: MX direct mount riser in red
Blue
What's Included: MX direct mount riser in blue
Not included: handlebars
FAQ
Q: What bars does it take?
A: Only 1-1/8" (28.575mm) motocross fat bars.
Q: Do I need to cut my steering tube?
A: Yes. Trim it to the correct length before installing.
Q: Will my E-Ride Pro display still fit?
A: Not the OEM display mount. Get a new display mount or cut off half of the stock one.
Q: How much rise does it add?
A: 1.75".
Q: What's the torque spec?
A: 132 in-lb (11 ft-lb) on the top clamp, tightening all 4 bolts evenly.