Upgrade Your FastAce Fork Setup with Warp 9 Drop Crown Triple Clamps
Unlock the full potential of your FastAce forks with Warp 9's FastAce drop crown triple clamps. Engineered for better tire clearance, corrected steering geometry and more adjustability, they are stronger than the stock clamps.
✅ FITMENT
Fits FastAce AHX12RV and ALX13RC (v1 or v2) forks with 39mm stanchions, a 48mm lower clamp area and a 46mm upper clamp area, on these bikes:
- Surron Light Bee X (2017–2024, 2025, 2026) and Light Bee S
-
Talaria Sting MX3 and R / MX4 (with FastAce forks)
- Talaria XXX and XXX Pro
- E-Ride Pro S, S (17") and SS 1.0 / 2.0
- 79Bike Falcon M, Pro and GT
- Ventus One
- Rerode R1
- Other bikes running compatible FastAce forks
Not compatible with: Talaria MX4 factory forks, KKE, DNM, EXT, Fox or any other fork models, or Volar and Rippin Moto brake systems.
E-Ride Pro note: You get a 1/4" drop instead of 1" on the E-Ride Pro because its head tube is shorter.
Key Features
-
Built for durability: 7075-T6 billet aluminum for an outstanding strength-to-weight ratio and stiffness
-
Enhanced tire clearance: 20mm wider than OEM, easily fits 90mm-wide tires with ample upper tube clearance under compression. Also works with supermoto wheels and wider tire setups.
-
1" drop crown: Lowers the fork tubes below the stock position, restoring your bike's head angle and correcting steering geometry
-
Adjustable bar mounts: 2 direct-mount stem positions with up to 10mm of forward or backward adjustment
-
Threaded top nut: Motorcycle-style top nut keeps your headset bearings tight, with no steer lock system needed
- Stiffer chassis feel
- Available in Black, Red, Blue, Purple, Magnesium, Gold and Silver
What's Included
- Warp 9 FastAce drop crown upper and lower triple clamps
- Offset brake caliper brackets for 203mm and 220mm rotors
Not included: Forks, or the 250mm rotor bracket. Purchase the 250mm caliper bracket here.
Tire tip: For bikes with a 21" front wheel and FastAce fork, we recommend the Dunlop MX33 or K990 (70/100-21) for the best fit and clearance.
Frequently Asked Questions
Q: Which forks do these clamps fit?
A: FastAce AHX12RV and ALX13RC (v1 or v2) forks only.
Q: Will they fit my Talaria MX4 factory forks?
A: No. They are not compatible with Talaria MX4 factory forks, KKE, DNM, EXT, Fox or other fork models.
Q: How much drop do they give?
A: 1" of drop. On the E-Ride Pro you get 1/4" because of its shorter head tube.
Q: What rotor sizes are supported?
A: Brackets for 203mm and 220mm rotors are included. A 250mm bracket is sold separately.
Q: How wide a tire can I run?
A: The clamps are 20mm wider than OEM and fit 90mm-wide tires.
Q: Do I still need a steer lock?
A: No. The drop crown design and threaded top nut remove the need for a steer lock system.
Q: What colors are available?
A: Black, Red, Blue, Purple, Magnesium, Gold and Silver.
