EBMX X-9000 V2 Controller Upgrade for Surron, Talaria, E-Ride Pro and Segway X260
This controller has been replaced by the EBMX X-9000 V3.
The EBMX X-9000 V2 upgraded controller kit is compatible with a range of electric dirt bikes and motors, including the Sur-Ron Light Bee and Ultra Bee, Talaria Sting and XXX, E-Ride Pro SS and Segway X260. EBMX combined in-house R&D with industry expert collaborations to build it, and it is purpose-built for dirt bike and E-Moto riders and simple to install. It pairs perfectly with EBMX high-performance batteries and motors if you're building a top-performing E-Moto. EBMX performance parts are built to high standards and backed by a 2-year warranty.
✅ BIKE FITMENT
2017-2024 Surron Light Bee X
2025 Surron Light Bee X
2026 Surron Light Bee X
Surron Light Bee S
Surron Ultra Bee
Talaria Sting MX3
Talaria Sting R MX4
Talaria Sting MX5
Talaria XXX
E-Ride Pro SS 1.0
E-Ride Pro SS 2.0
E-Ride Pro SS 3.0 (original version with breaker)
Segway X260
Does not fit newer E-Ride Pro SS 3.0 models without a breaker. This kit was made for the original E-Ride Pro SS 3.0 with a breaker; EBMX is working on a kit for the model without a breaker.
The EBMX X-9000 V2 controller kit contains all parts required to replace your OEM controller with the EBMX X-9000 high-performance controller. Be sure to check compatibility and fitment before purchasing.
This kit is an easy-to-install, DIY bolt-on controller upgrade for the Segway X260, Surron Light Bee and Talaria Sting. No drilling, no extra brackets, no wires to extend and no additional parts needed (wiring harness adapter is included).
Official EBMX Installation Video
Black
Best for: Riders who want the black air-cooled heatsink.
What's Included: EBMX X-9000 V2 controller with the black air-cooled heatsink, plus the standard kit contents listed below.
Not included: The bike-specific wiring harness kit (sold separately).
Red
Best for: Riders who want the red air-cooled heatsink.
What's Included: EBMX X-9000 V2 controller with the red air-cooled heatsink, plus the standard kit contents listed below.
Not included: The bike-specific wiring harness kit (sold separately).
Blue
Best for: Riders who want the blue air-cooled heatsink.
What's Included: EBMX X-9000 V2 controller with the blue air-cooled heatsink, plus the standard kit contents listed below.
Not included: The bike-specific wiring harness kit (sold separately).
Gold
Best for: Riders who want the gold air-cooled heatsink.
What's Included: EBMX X-9000 V2 controller with the gold air-cooled heatsink, plus the standard kit contents listed below.
Not included: The bike-specific wiring harness kit (sold separately).
Purple
Best for: Riders who want the purple air-cooled heatsink.
What's Included: EBMX X-9000 V2 controller with the purple air-cooled heatsink, plus the standard kit contents listed below.
Not included: The bike-specific wiring harness kit (sold separately).
Standard Kit Contents (All Colors)
Harness adaptors for Surron and Talaria
Variable thumb throttle
Bluetooth module
Loose harness for 12V outputs
SW102 display (with custom EBMX firmware and options)
Optional extras (not included as standard): DIY harness for custom bike conversion; water-cooled heatsink.
Compatible Motors
OEM Surron Light Bee
OEM Surron Ultra Bee
OEM Segway X260
OEM Talaria Sting MX3
OEM Talaria Sting R MX4
OEM Talaria Sting MX5
EBMX XLB-60
EBMX XLB-60 RACE
EBMX XUB-80
KO RS Surron
KO F Spec Surron
KO F Spec Talaria
QS138 90H
QS138 70H
Sotion FW01
Sotion Talaria
E-Ride Pro SS 2.0 OEM motor
E-Ride Pro SS 3.0 OEM motor
EBMX is currently tuning the following motors and will update the list above as each motor is fully tested and available to choose in the EBMX app:
Apollo RFN
ME1803 water-cooled
QS Braaap Moto E hub motor
Custom Tunes for Various Motor Options
Stock Surron Light Bee motor
Stock Talaria Sting motor
KO Moto motors
Surron Ultra Bee motor
QS138 90H water-cooled motor
QS138 V3 gear reduction motor
ME1803 water-cooled motor
Arctic Leopard motor
More coming soon from EBMX
Features
EBMX uses components sourced from reputable suppliers, and every part has been engineered for maximum performance, from the CNC machined internals and bus bars to the injection-molded cover and fully waterproof construction. Whether you're trying to nail a wheelie, riding hard enduro, competing in a race series or cruising the trails with your family, the X-9000 is built to give you ultimate freedom and control.
Custom EBMX app for tuning and full control (free in the App Store and Google Play Store)
Multiple power modes and full adjustment in each mode
Adjustable speed limits for different ride modes
Customizable dashboard to set the display up how you want
Built-in programmable DC/DC converter with 4 programmable 12V outputs for running a coolant pump, headlights and other 12V accessories, controllable through the app
Air-cooled heatsink as standard (black, blue, red, gold or purple)
Wiring harness connections are fully sealed and come straight out of the controller with fully waterproof IP67-rated connectors
Direct bolt-in for the Surron Light Bee and Talaria Sting with no extra brackets, phase wire extensions or other additional parts (harness adapter included)
Integrates with both Surron hall-based motors and Talaria encoder motors
SW102 (EggRider) display included, with custom firmware to monitor motor temp and controller temp along with all the regular display info
Can be set up with a smartphone as the display or to check info as desired
Super heavy-duty construction inside and out to handle hard riding and high-powered batteries and motors
EBMX App Features
Free to download
Use as a display with a full, customizable dashboard
Street mode (3 separate programmable power settings)
Race mode (3 separate programmable power settings)
Speed limit settings
Control 4 separate 12V outputs
Power adjustments (kW)
Control options for the thumb throttle
Torque adjustments (phase amps)
Fully customizable regen settings
Throttle sensitivity (ramping and curve type)
Throttle calibration wizard
Motor tune selection
Quick change from 48V up to 72V battery
Stock tilt sensor (on/off)
Stock stand sensor (on/off)
Gear ratio adjustments for accurate display speed
EBMX X-9000 V2 Controller Specifications
EBMX X-9000 V2 Controller
Specification
Compatible with VESC firmware
Yes
Custom EBMX firmware and tune profiles
Yes
Control method
FOC
Input voltage range
40V - 100V
Working voltage range
48V - 82V
Max phase current
1000A
Max battery current
500A
Peak input power
40kW
Peak output power
35kW*
Continuous output power (water-cooled)
20kW*
Continuous output power (air-cooled)
15kW*
Operating temperature range
-25 to 80 degrees Celsius
Maximum efficiency
>95%
Extra-beefy internal CNC machined terminals and connections
Yes
* To reach maximum performance and continuous output power levels, you need a high-performance motor and a battery capable of performing at this level.
Controller Case Features
Case Feature
Description
CNC air-cooled heatsink option
Available
CNC water-cooled heatsink option
Available
Direct factory-fit mount
For Surron Light Bee X and Talaria Sting
Ingress protection
IP67 rated
16-pin communications plug
Combines all types of bikes used
12-pin 12V plug
4 programmable outputs
Built-in programmable DC/DC converter
12V 5A, to run a coolant pump, lights and auxiliary features
FAQ
Q: Is the X-9000 V2 still the current version? A: No. It has been replaced by the EBMX X-9000 V3.
Q: Does it include the wiring harness for my bike? A: No. The bike-specific harness is sold separately; see the EBMX X-9000 harness kits.
Q: What display comes with it? A: An SW102 (EggRider) display with custom EBMX firmware that shows motor temp and controller temp along with the regular display info.
Q: Can I tune it from my phone? A: Yes. The free EBMX app (App Store and Google Play) lets you adjust power modes, speed limits, regen, throttle response, motor tunes and the 12V outputs.
Q: What voltage does it run? A: Input voltage range is 40V-100V and working voltage range is 48V-82V. The app allows a quick change from a 48V up to a 72V battery.
Q: Does it fit the E-Ride Pro SS 3.0? A: Only the original SS 3.0 with a breaker. Newer SS 3.0 models without a breaker are not supported by this kit.
Q: What warranty does it have? A: EBMX performance parts are backed by a 2-year warranty.
Not for use on public roads. May increase power beyond factory specs, void your bike's manufacturer warranty, and make your vehicle non-compliant with local laws. Riders must be at least 16 years old and are responsible for following all local laws and regulations.
Off-road competition use only.
Bike Fitment
Make Sure to get the correct adapter
Videos
This Product Ships from TB Electric in Utah
All orders placed before 3PM MST ship out same Day. (Only on weekdays)
This product is in stock at our warehouse unless it says otherwise.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
The overall experience with controller was simple and straight forwarded. It was abit difficult to put on the bike due to the wires and having to route everything neatly TB was super quick on their part everything was included now I’m pushing 600 phase amps and 15kw with the stock motor and battery this things is an absolute beast with 72V
A
A.C.
10/10 controller 3x my power
M
MDW195
X9000 on Stock Surron
I was blown away by TB Electric. I ordered the X9000 for our LBX as we were chasing a throttle issue, and I wanted the Torp TC1000, but since it wasn't in stock anywhere, I decided my second choice (the X9000) was worth a shot, and found that TBElectric had it in stock. So glad we went this route. The bike (with a stock battery 60V32Ah) is transformed. Already had the Domino throttle as we were chasing an intermittent issue, once the throttle was mapped, the bike went from being a difficult bike to wheelie, to floating up to BP with relative ease. Not only that, but there is so much programmability in the controller, (I hope we don't screw that up). but with throttle regen for breaking, ability to change batteries quickly and easily, and just the overall riding experience upgrade, I am now thinking I want the same thing for my MX4. Now I see why so many people have controllers on their bikes...it actually improves the stock bike experience. I cannot imagine what it might be like with a 72V battery...but that will have to wait for now.
Anyway, this thing arrived within a few days!...for some reason, I was expecting to have to wait a week or two if not more. The whole experience blew me away. Good job guys.
E
E.B.
Everything I ordered came fast Great service!
I
I.J.
Awesome company… fast shipping and i totaly recommend them… awesome product too