EXT Arma MX Rear Shock for Surron, Talaria, E-Ride Pro & More
This is the best shock in the industry, and it's the shock we run on all of our personal bikes. It's a night and day difference from the OEM shock, and paired with the EXT Ferro fork it's unbelievable. The Arma MX is a direct bolt-on replacement for the Surron (Sur-Ron) Light Bee X, Talaria Sting and E-Ride Pro SS. No additional hardware is needed: bolt it on and go.
ā
BIKE FITMENT
- Talaria Sting MX3
- Talaria Sting MX4
- Talaria Sting MX5
- Talaria XXX
- Altis Sigma
- E-Ride Pro S
- E-Ride Pro SS 1.0
- E-Ride Pro SS 2.0
- E-Ride Pro SS 3.0
- E-Ride Pro SR
- E-Ride Pro 4.0
- Surron Light Bee X (2017-2026)
- Surron Light Bee S
- Surron L1E
- Segway X-260 / X-160
- 79Bike Falcon M
- 79Bike Falcon Pro
- 79Bike Falcon GT
- 79Bike Falcon Lite
- 79Bike Lynx
- Ventus One / One Plus / One Plus EVO
- RFN Apollo
- Rerode R1 / R1 Plus
- Zero XB
- Vetra Blazer
- Arctic Leopard XE Pro S / XE Pro R
- Tork Pro Sport
- Throne Srpnt
Features
- 4-way adjustable: LSC, HSC, LSR and HBC (Hydraulic Bottom-Out Control)
- Enhanced HBC with a wider adjustment range, so you can run a softer spring without bottoming out
- High flow 29mm main piston and 24mm valve piston
- 14mm shaft, 50% larger than most other coil shocks, to handle big side loads
- Engineered rebound circuit separates bump and rebound oil flow, with ultra low-friction coating
- Very low reservoir pressure (55 PSI) for maximum sensitivity and low cavitation
- Full custom hydraulic setup, specific to each bike and rider
- Very low hysteresis, low friction seal, debris clearing washer and low profile rebound knob for easy spring swaps
- Includes 1 lightweight spring and bike-specific mounting hardware for an easy bolt-in install
- Special edition shock built in limited runs
Spring Guide
Rider weight includes all your gear.
| Rider weight (lb) |
Spring |
| Up to 140 |
400LB |
| 140 to 180 |
450LB |
| 180 to 210 |
500LB |
| 210 to 240 |
550LB |
| 240+ |
600LB |
This chart is for Surron, E-Ride Pro and Segway X260. For the Talaria Sting MX4/R, go one spring rate higher. For a firmer or softer feel, choose one spring weight above or below. Check your bike's maximum rider weight limit. Questions? Contact us.
400LB
Best for: riders up to 140 lb with gear.
What's Included: Arma MX shock with 400LB spring and mounting hardware
450LB
Best for: riders 140 to 180 lb with gear.
What's Included: Arma MX shock with 450LB spring and mounting hardware
500LB
Best for: riders 180 to 210 lb with gear.
What's Included: Arma MX shock with 500LB spring and mounting hardware
550LB
Best for: riders 210 to 240 lb with gear.
What's Included: Arma MX shock with 550LB spring and mounting hardware
600LB
Best for: riders 240 lb and up with gear.
What's Included: Arma MX shock with 600LB spring and mounting hardware
650LB
Best for: heavier riders, or Talaria Sting MX4/R riders over 240 lb who go one rate higher.
What's Included: Arma MX shock with 650LB spring and mounting hardware
Need a different spring later? See the EXT Arma MX replacement spring.
FAQ
Q: Is the Arma MX a bolt-on install?
A: Yes. It is a direct bolt-on for the Surron Light Bee X, Talaria Sting and E-Ride Pro SS, with mounting hardware included.
Q: Which spring should I choose?
A: Use the spring guide above with your weight in full gear. Talaria Sting MX4/R riders should go one rate higher.
Q: Is a spring included?
A: Yes. The shock comes with 1 lightweight spring in the rate you choose.
Q: What can I adjust?
A: Low speed compression, high speed compression, low speed rebound and hydraulic bottom-out control.
Q: Does it pair with a fork?
A: Yes. It pairs with the EXT Ferro fork, or get both in the EXT Suspension Upgrade Bundle.